1 / 1
Kitchen Cabinet Pullout Drawer Ramp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ramp for the sides of kitchen cabinet pullout drawers so that the cabinet door doesn't get stuck on the drawer.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 1
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Our kitchen cabinet pullout drawers would often get hooked onto the cabinet door when pushing in the drawers due to the drawer face overhang. This slide attaches to the side of the pullout drawer so that if the door is slight closed with the drawer fully extended, the door will gently open up and not get caught on drawer.
The slide attaches with a #6 countersink wood screw (whatever length works for you).
Credit goes to my son for inventing this part!
Printer Settings
- Material Type: PLA - Not limited to
- Layer Height: 0.2 mm
- Top/Bottom Layers: 5
- Wall Thickness: 1.0 mm
- Supports: No
- Infill: 15%, Grid
- Ironing: Yes (not required)