Elegoo Centauri Carbon Door Hinge Gasket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gasket for the door hinge to help heat retention for the Elegoo Centauri Carbon
- Rating
- 0 / 5
- Likes
- 77
- Downloads
- 274
- Makes
- 2
- Views
- 2,259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For those that are trying to seal their Centauri Carbons for heat retention, this little gasket should help. The hinge pinches tighter as you close the door and open the door so I fit it best I could.
Please have your tpu dried and dialed in and this'll be easy to print. As always with these machines tolerances and fit may vary.
TPU seal is held in by 4 strips of ½" 3M Scotch VHB tape x60mm long
https://www.amazon.com/dp/B01BT0A6MG?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
Let me know if there's a problem and I'll try to accomodate.