1" Ball Mount - Easy To Print - Easy To Modify
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw a 1" ball mount to anything with a hole. Easily added to other prints. Easy to print and easy to modify.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
This is a simple 1" ball mount, compatible with similar commercial mounting systems. This simple ball mount can be screwed to another part to allow it to be conveniently mounted. This version uses a 6 mm machine screw that protrudes 15-16 mm but The FreeCAD file is included to make it easy to modify for your own application. I printed it with ABS-CF but almost any material will work. TPU will result in a rubbery ball but the texture and 0.25 mm layer lines made the ABS-CF version very grippy. Print with the ball flat in contact with the print surface. I used a generous brim to ensure it stuck to the bed but that won't be necessary with TPU and probably not with some other materials.
I used the ball mount with Printable 414028 to mount my drone controller to my motorcycle handlebars.