1 / 3
MK3 (s+) Stealthburner V0.5 - s krytem ventilátoru a s otvory na lepší chlazení — image 1
1 / 3

MK3 (s+) Stealthburner V0.5 - s krytem ventilátoru a s otvory na lepší chlazení

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.98 – €3.64 net (excluding VAT)

For file: sb_stealthburner-case-fan-shield(2)_0.32mm_PETG_MK3S_3h4m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.31 excluding VAT (range midpoint).

Weight reported by the author
50 g
Print time reported by the author
3.06 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Přidané otvory pro lepší chlazení motoru extruderu

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
116
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

Používal jsem už původní model, ale přisávání horkého vzduchu od výtisku zhoršovalo kvalitu tisku a tak jsem si stáhl vylepšený, který tiskl přeci jen lépe. Ovšem i ten jsem si upravil odstraněním horní části, aby se lépe chladil motor extruderu.
Tohle je zatím konečná úprava, která snad má všechny výhody a nevypadá tak ořezaně…

Omlouvám se, že není STL soubor, ale úpravy jsem spáchal přímo ve sliceru a  nepovedl se mi export souboru do STL.

Tags