1 / 7
Bosch GKF 18V-8 Edge Guide Fence Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Edge Guide Fence Mod for the Bosch GKF 18V-8 and GLF 18V-8
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 56
- Makes
- 1
- Views
- 486
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Edge Guide Fence Mod
This modification can be used for the edge guide of the Bosch GKF 18V-8 and GLF 18V-8.
Additional Components:
You will need M5x10 screws or thumb screws and short M5 heat-set inserts, like*:
* I do not make any profit with the provided links, just as an example.
Print Recommendations:
| Setting | Value |
|---|---|
| Material | PETG |
| Layer Height | 0.2 mm |
| Layer Width | 0.4 mm |
| Wall Loops | 8 |
| Top Shell Layers | 8 |
| Bottom Shell Layers | 8 |
| Sparse Infill Pattern | Gyroid |
| Sparse Infill Density | 25 % |