1 / 2
Foot cap for Spaceo metal rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Foot cap for Spaceo metal rack - ones on printables didn't fit
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Public Domain
The metal rack came without foot caps, so I had to make them. The ones of printables didn't fit - since the metal profile is bended on the edges.
The foot is 5mm tall, the space for metal profile is 3mm wide and 37mm long.
I would recommend 100% infill with PETG, ABS or ASA. Don't use PLA if you want for caps to last long. If it's too loose, you can scale it or drop a bit of glue inside.
The exact metal rack:
https://www.leroymerlin.pl/produkty/regal-metalowy-70-kg-185-x-90-x-40-cm-5p-spaceo-86360421.html