University of North Dakota (UND) Fighting Hawks Logo - Multi-Color
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
University of North Dakota (UND) Fighting Hawks Logo - Multi-Color
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Show your school pride with this multi-color 3D model of the University of North Dakota Fighting Hawks logo. This is a faithful, high-quality reproduction perfect for students, alumni, and fans of UND.
This model is designed to be printed in three colors (green, white, and black) to create a striking and accurate representation of the logo. It's a great decorative piece, perfect for turning into a coaster, a magnet, or a display for your desk or shelf.
I have included a pre-configured 3MF file for the Prusa i3 MK3 / MK3S+ (with MMU2S) that has all the color changes and print settings ready to go. An STL file is also provided for those who wish to configure it for other printers or for manual filament changes.
Printing Instructions
This is a multi-color print. For the best results, follow these instructions.
Method 1: Multi-Material Printer (e.g., Prusa with MMU)
Simply load the provided 3MF file into PrusaSlicer.
Assign your green, black, and white filaments to the correct extruder/tool number.
Slice and print!
Method 2: Manual Filament Change (for single-extruder printers)
Load the STL file into your slicer (e.g., PrusaSlicer, Cura).
Set the base color to Green.
Slice the model.
In the print preview, find the layer where the Black details first appear and add a filament change command (M600).
Find the layer where the White color first appears and add a second filament change command.
Export the G-code and print. Your printer will pause automatically, allowing you to swap filaments.
Recommended Settings:
Material: PLA works great.
Layer Height: 0.20mm for a good balance of detail and speed.
Infill: 15% is sufficient.
Supports: Not needed.