1 / 3
Ikea Besta conical feets / legs 10cm M8
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feets / Legs for Ikea Besta corpus
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Feets / legs for Ikea Besta corpus with a height of 10cm.
One feet needs one hexagonal M8 bolt in length of 40mm for mounting.
Mounting of the foot:
- Hold the foot upside down, so that the hexagonal hole show to to top.
- Insert the M8 bolt, with the thread showing to the bottom, through the foot.
- Shake the feet till the bolt falls through the 8mm hole.
- Put something such as a small pen through the feet to fix the bolt in place.
- While holding the pen to fix the bolt, flip the foot and screw it into the Besta corpus.
A felt pad can be glued afterwards to protect the floor.
I recomment filament which can bear a high(er) mechanical load such as PETG.
If you have any comments, suggestions or similar, you are welcome to contact me.