Kitchen Trash Bag Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kitchen cabinet mounted holder for plastic grocery store bags used for trash.
- Rating
- 5 / 5
- Likes
- 348
- Downloads
- 845
- Makes
- 4
- Views
- 4,738
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife started hanging grocery bags on the kitchen cabinet door. I decided I could do better than the door handle and designed a couple of brackets that fit the door and sort of held the bag open. Not being completely satisfied with how awkward it was to fit the bags and how poorly they stayed open at the top I designed this hanger.
Printing orientation for the holder and ring is obvious. The hooks can be printed either upside down with organic supports on the bit of the hook that hangs over or printed on their side with supports on the lower edge of the dovetail. Cleanup is a bit easier if you print it upside down, but the part is stronger printed on it's side. I'm currently using one printed each way and they're both holding up ok so far.
All parts were printed in PLA with three perimeters and 15% grid infill.
I've included the .step file for the hooks in case you'd like to modify them to match your cabinets. They are currently a perfect fit for mine and don't move in normal use.