1 / 1
Catan Resource Card Insert for Sleeved Cards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smaller custom insert for Catan (Kosmos 4th edition) resource cards (sleeved). Based on BASE Card_3x RevA HALF.stl.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 84
- Makes
- 2
- Views
- 352
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Share Alike
This is a modified version of the popular “BASE Card_3x RevA HALF.stl” insert, redesigned to fit sleeved resource cards from Catan (only tested with the swedish 4th edition cards (by Kosmos)
Printing Recommendations:
Material: PLA
Layer Height: 0.2 mm
Ironing:
I recommend printing with ironing enabled (especially on the top layers of the card slots) to make it easier to pick up the last card without resistance.
Ironing Speed: 70 mm/s
Ironing flow: 28%
Ironing line spacing: 0.15mm
Ironing inset: 0.25mm
Ironing angle: -1