Virpil CM3 Angled 4040 Extrusion Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 12° angled F16 base for the Virpil MongoosT-50CM3 Base, made to mount on a 4040 extrusion simrig.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Designed a rather sturdy mount for my simrig so I can attach my Warthog stick under the 12° angle like the real F16. (Real one also has a 12° offset to the right but didn't do that one … yet).
It was either this or buying yet another base from realsimulator with the angled attachement.
Make sure to recalibrate your stick when you use soft springs as the stick might lean forward due to the weight. I use the hardest spring with quite heavy damping to simulate the real force sensing stick.
Anyway… happy flying!
Printed with Sunlu PLA, 3 perimeters and 25% Cubic infill. As shown in the picture I used generic cylinders with 80% Cubic infill to strengthen the holes for the screws (i have a tendency to overtighten)