Whistle Ring
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.21 – €0.25 net (excluding VAT)
For file: Whistle Ring size 10 (19.8mm)_0.2mm_PLA_MK3S_16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A quick print for a loud whistle that can be worn as a ring.
- Rating
- 4.826 / 5
- Likes
- 1,167
- Downloads
- 7,630
- Makes
- 154
- Views
- 19,671
- Reviews
- 109
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The small indention is where you should align your lower lip when you blow.
Sizes are in US and diameters(mm). Pick your size and print. I've test printed in PLA, PETG and TPU.
Smaller sizes may require a brim to properly print.
Enjoy!
User Tip: If no noise is being made, try using a hair dryer or lighter to remove any stringing that is hidden within the whistle ring.
Fun Fact: You can see this model on the Netflix show Fubar(Season 2). Go watch and see if you can spot it!