Gridfinity UltraLight Bin Labels (Multicolor, EZ PRINT, NO MMU)

Give your UltraLight Gridfinity bins a quick, professional-looking label—no label maker required! These snap-on plates are engineered for maximum printability and flexibility, so you can get organized in minutes.

Key Features:
 

Rounded-Edge Font: Prevents filament drag and ensures crisp, clean lettering.

Nozzle-Friendly Dimensions: Label and text heights are common multiples of 0.2 mm and 0.3 mm—print equally well with a 0.4 mm or 0.6 mm nozzle.

Multicolor Made Easy: Pause at 0.8 mm (for 0.2 mm layers) or 0.9 mm (for 0.3 mm layers), swap filament, and voilà—two-tone labels without an MMU.

Lightweight & Fast: Thin-walled design prints in record time with just 10–15 % infill.

Universal Fit: Tolerance-baked to match your existing labeled bins— just use the same material you printed your bins with as the base.

Print Settings:

Walls: 1–2 perimeters

Layers: 0.2 mm or 0.3 mm height; 1 bottom layer, ≥2 top layers for strong contrast

Infill: 10–15 % (or whatever you prefer)

Supports: None—print flat on the bed

Filament: Whatever you used to print your bins with. These are tested working great with PETG.

Instructions:

Slice the blank label and emboss your custom text

• 0.4 Nozzle- use 0.4 mm height for 0.2 mm layers 
• 0.6 Nozzle- use 0.6 mm for 0.3 mm layers

(Optional) For two-color prints, insert a pause or color change at the specified height (0.8 for 0.4 nozzles) (0.9 for 0.6 nozzles), swap to your accent filament, then resume.

After printing, apply a small dab of CA glue (or your favorite adhesive) and stick onto the bin.

Note: Labeled bins won’t stack flush on top of each other—plan your layout accordingly.

What’s Included:

Blank label 3MF for custom embossing

.3MF and STL batches for M3, M4, and M5 screw-size label presets

Loved these? Fuel more fun 3D-print projects (and get early access to my next designs) by buying me a coffee: ko-fi.com/tiniprints ☕✨ “Organize faster than you can say ‘Gridfinity’!”