1 / 11
Air condition dual hose modification DeLonghi PAC EX100 silent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the 3D printed parts to modify the DeLonghi air-conditioning unit to a 2-hose setup.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 712
- Makes
- 3
- Views
- 3,330
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup.
The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa XL
The longest part is 292mm
The big housing is 232 x 282mm.
The round adapters fit a 150mm hose, the one I bought is a cheap PVC hose, the siral grooves do not reall bring any benefit, the hose is secured in the end with some tape to the adapter.