Climbing Chalk Bag Harness Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A chalk bag harness mount for chalk bags with a single hoop. Designed to hold the chalk bag high and close to the body.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 2
- Views
- 235
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
A chalk bag harness mount for chalk bags with a single hoop. Designed to hold the chalk bag high and close to the body. This will make the chalk bag bounce less on the way down from a route and is still quite ergonomic for me. If it is too high to use comfortably, the harness mount can be turned around and used upside down.
Fits Black Diamond Momentum / Momentum 4S / Solution / Airnet and probably most other with the same design of the “0 kN Loop”
Only for use with chalk bags which has a single belt loop. If you have a bag with two belt loops, check out Max R's design, which inspired my model: https://www.printables.com/model/115219-chalk-bag-harness-clip
Designed in OnShape. Public link: https://cad.onshape.com/documents/755e03344348d730401dc2d0/w/847e6919d68846353d97a2b4/e/237f68412c0905768c5735b5?renderMode=0&uiState=686e5e6446b09e5fb4291936
Print Instructions
Print in 100% infill PETG or TPU. PLA can work for a bit, but it doesn't take much to break the “arm” off, if you fall weird or whack your chalk bag in some way.