1 / 3
Starlink Mini (2025 version) Pole to Tripod adpater
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sizes changed at some point on the pole adapter so I made my own.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 386
- Makes
- 2
- Views
- 2,284
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Add a pause at 8mm and push in a 1/4-20 nut. Make sure it is recessed below the current print hight.
I printed mine with prusament PC-CF, .2mm, 5 walls to make the outer wall solid. The lock bolt that comes with the mount will thread itself through the hole in the side and it provides a very solid mount.
Use the long version if you intend to mount a lens plate or want to use 1/4 -20 to mount to a large flat surface.
These are the ¼-20 nuts I used: https://www.amazon.com/dp/B0CJ9FFH2Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1