1 / 1
Moog Profile Eurorack Case 40hp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of Funktional's expandable design to a fixed 40hp with a port on the back for a power module
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 52
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I took the module-left-45hp.stl from Funktional's design, mirrored the sides so it has mounting holes for two end-cheeks, and trimmed it down to 40hp. I did all of that in the slicer, so the model's a little mangled on the inside, but it slices very nicely so no worries there.
Designed to print vertically, and WARNING: it matters which side is down. The left side (if you're facing it as you'd use it) should be placed on the bed - see the screenshot