1 / 4
Parametric SMD Component Magazines - Varnerized Edition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Based on the already outstanding remix by tobi, this has some tweaks for assembly and printability with a 0.6mm nozzle
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 31
- Makes
- 0
- Views
- 220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Required parts
- M2.5 x 6mm countersunk screws
- Metric screws are not ideal for this purpose, but they are working really well here.
If you have suitable self-tapping screws, use those.
- Metric screws are not ideal for this purpose, but they are working really well here.
- Cheap 5/16" and ½" round stock
- Mild steel, nothing fancy
- Cut to the length of your rail
- Spring (Wire 0.3mm, OD: 4mm, Length=20mm)
- Maybe 0.4mm wire would be better… 0.3 works well. It's not very forceful though, so you might need to do a little bit of filing to get the silders moving very smoothly.
Printing
- I used a textured bed. It's glorious.
- .25mm layers, 0.5mm first layer.
- .6 nozzle