1 / 3
Slatwall DeWALT 20V MAX XR Reciprocating Saw Hanger ("sawzall") — image 1
1 / 3

Slatwall DeWALT 20V MAX XR Reciprocating Saw Hanger ("sawzall")

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slatwall DeWALT Reciprocating Saw, uses 4-inch hooks for mounting, see the hookhybridslatwall tag for more.

Rating
0 / 5
Likes
5
Downloads
41
Makes
0
Views
340
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Like the rest of the Slatwall models I am releasing with the ‘hookhybridslatwall’ tag, this hanger for a DeWALT 20V Reciprocating Saw clicks together with a couple cheap 4-inch metal hooks to avoid having a printed plastic part in the key structural section of the part.
 

There is a version to hold the saw blade case as well, slides in and out easily enough.


The specific hooks I ordered are here, but likely any 4-inch hooks with approx 4.0-4.3mm diameter rods should work here.

Joining the hooks to the part is simple (and the same operation for every part with the ‘hookhybridslatwall’ tag):

  1. (optional) If you have a different brand of hooks with bad tolerances, consider adding some extra bend to the hook tip angle so it better matches the tip angle at the end of the channel halfpipes
  2. Insert the hooks through the elongated holes at the back of the hanger with the hook tips pointing down
  3. Push the hooks through the part until the hook plate is flush with the back of the hanger
  4. Rotate the hooks about the rod axis until the hooks are pointing ‘up’, and the hook clicks into the halfpipe channel securely

I am using ‘Proslat’ brand slatwalls here (the cheapest PVC version), but any slatwall should work fine with the offbrand hooks regardless.

This part has the best structure when printed UPRIGHT (as the model is uploaded), in which case it requires some supports under the hook rails.
(somewhat HEAVY item, print grain matters here for longevity!)

You can bend the top of the cheap hook plates forward for a firmer hold on the slatwall (see image).

Printed with a 0.8 nozzle and 0.32 Z-heights

Edit: Whoops, added text deboss

Tags