Ring Toss

I present to you my version of the classic game, Ring Toss. 

I've included two options for the rings: a rounded version with a large opening, and a set of concentric rings. 

Rounded Rings

• You can print as many copies as you want, in as many colors as you want. 
• In my version, I printed three each of two different colors so people could challenge each other to a game. 

Concentric Rings

• Intended for a more challenging version of the game. 
• Think of each ring as a level. Level 1 (outer) is the easiest. Level 2 (mid) is a little harder. Level 3 (inner) is the hardest. There are lots of options for how you could play. You could assign a point value to each level, or set a rule that you have to toss them in order before you can move on - first to get all three wins, etc. 

Print Settings

• For the ring stand 
  • I added a modifier to the bottom (approx. 20mm in height) where I set the infill to 50% (cubic). 
  • For the remaining infill, I did 25%
  • 3 wall loops
  • 0.22mm layer height
• For the rings
  • 25% infill
  • 2 wall loops
  • 0.22mm layer height (but you can go finer if you'd prefer)