1 / 2
Cover for power strip switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple cover to block the light from an power strip switch
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 2
- Views
- 124
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Description
This is a simple cover for the lighted switch and over-voltage protection light on an power strip.
This is used block the light, to minimize the disturbance during night time.
Needed Material
- 1x Bottom (big/small)
- 1x Top (big/small)
- Some filament
Building instructions
Put the top on the bottom part and press some filament into the hole.
Afterwards mount the cover with some glue onto the power strip.
Additional Information
This part was designed with Onshape.
You can also check out my Thingiverse page: https://www.thingiverse.com/a14x/designs