Fantasy short swords or daggers - low res to high res
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a set of fantasy short swords or daggers (depending on print size). They go from low res to high.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 262
- Makes
- 2
- Views
- 952
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Public Domain
This is a set of fantasy short swords or daggers (depending on print size). They go from low res to high. Fun to play with. Careful, they are somewhat sharp. If you're going to poke at people with them, I recommend modifying the tip and edges for safety.
You can print these tiny for figurines, or people-size for goblin hunting.
On an aesthetic note, and for any hobby bladesmiths out there, the blades have a compound distal taper. The thickness is more uniform at the base, with the edge tapering down while the spine tapers toward a thicker point near the tip. This results in a diamond shape toward the tip of the lower resolution blades. On the highest detail sword, a spine is added from the base of the blade, reminiscent of the strengthening spines on bronze and early iron swords.
Please enjoy responsibly.
Print instructions
To get larger sizes on a small print bed, it may help to rotate ~45 degrees on the x axis, then z axis, then center. You'll be able to print from the bottom corner to top z-axiz corner that way, with supports.