1 / 4
Parts for Ambrogio L50 L60 robotic lawn mower — image 1
1 / 4

Parts for Ambrogio L50 L60 robotic lawn mower

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Various parts for Ambrogio L50 and L60 automower.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Drive belt for 4wd. Original cam belt contains reinforcements that prevent stretching and that is difficult to 3D print. This belt is as thick as possible to minimize stretching but it do jump teeth quite frequently so it is only for emergency use and is far better than nothing… I printed in EasyFlex TPU 100% infill but it is a bit too stretchy but working…

Spacer to lower the cutting disc by 5mm. Need M4x10 screws.

Drivewheels is best printed with outer perimeters first for best fitness and I also used 4 perimeters which means practically no infill at all…

The belt cutting tool is for splitting a 25mm wide belt into 4 pcs of 6mm belts. I used a 425-5MHP-25 Optibelt OMEGA HP High Performance HTD Timing Belt from https://bepltd.com/

 

Tags