Ikea Milsbo Wire Closet Shelf Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wire Shelf Supports for Ikea Milsbo Cabinet
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 564
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I grabbed some wire closet shelves from Home Depot (they will cut them for you too!) to make an Ikea Milsbo Greenhouse Cabinet. I printed it in ASA with 0.4mm nozzle with a 0.2mm layer height and it has held up great.
M4x12mm screws should work perfectly, but I had some success with M4x10 up to M4x16mm socket cap screws. To hold back the wire shelf, I used two zip ties behind the corner shelf support.
Other models I used in my build are below:
https://www.printables.com/model/1061806-monstera-ikea-milsbo-handles
https://www.thingiverse.com/thing:4679671/files
https://cults3d.com/en/3d-model/tool/pc-monstera-fan-cover-pc-cubierta-de-ventilador-monstera