1 / 2
Timber holding jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A jig to hold your timber in place while planing, sanding, carving etc.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 44
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A jig to hold your timber in place while planing, sanding, carving etc.
Designed to fit in a ½' (12.7mm) 14 ° dovetail slot, like the ones used in the MicroJig Matchfit System.
I recommend printing with 3 perimeters and a high infill rate (40 to 60%) for greater strength.
This project requires two M4 25mm bolts and matching nuts.