Sunflower (Slunečnice) - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sunflower (Slunečnice) - 150x150 mm - HueForge
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x150.04mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
PLA HIGH SPEED 3DPower Flame Red Transmission Distance: 3.3
PLA HIGH SPEED 3DPower Papaya Orange Transmission Distance: 5.7
PLA HIGH SPEED 3DPower Amber Yellow Transmission Distance: 6.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Flame Red
At layer #14 (1.2mm) swap to Papaya Orange
At layer #22 (1.84mm) swap to Amber Yellow for the rest.