1 / 2
Shellfish Stock Quick Release Core
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is based off of the quick release stock from the Crush files. I adapted it to the stock already in the Shellfish
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print one of each part. The core and panels will replaced the equivalent parts from the original shellfish files. The 2 additional files are for the release mechanism. You will also need 2 m3x30 screws and 2 springs to go over the screws to keep the lock tight when not pressed. The Crush instructions have a visual of this that I have added.
I used this plate to attach the stock to:
https://www.printables.com/model/1275674-shellfish-picatinny-rear-plate