Midea U Shaped Window Air Conditioner Bracket Rubber Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement rubber foot for the window bracket that holds the AC. Print in TPU.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 0
- Views
- 295
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
My Midea U Shaped AC was missing a rubber foot for the window bracket so I made this as a replacement for it.
I printed this on it's side with supports enabled in TPU 95A and although it's stiffer than original it does the job.
You could print with a brim but it's a pain to remove it.
I've also included a modified version (pictured) of the rubber foot that has extra support for my specific house siding but you will likely not need this. If using the modified version or remixing it I suggest using a Gyroid infill with 25% or more infill. I printed one with 15% and that was too soft for my liking.
The model can be modified in TinkerCAD