1 / 7
Headphone stand clamp 35mm or 45mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smooth outer corners with a slightly bubbly look, for my Stax
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 241
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Smooth outer corners with a slightly bubbly look.
Designed for my Stax headphones. There’s a small gap to hold the cable in place, but it should work with any other cable too.
Stax headphones use a flat and wide cable, so most regular stands weren’t really up to the task, that’s why I made this one.
It’s made of three pieces, and all can be printed at the same time.
Max thinks the desk is 35 mm with the screw feet and 45 mm without the screws.
Print settings:
Material: PLA (matte recommended)
Layer height: 0.16mm
Wall loops: 2
Infill: 5% (gyroid pattern)