Trident Pin Mod plus double shear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pin mod and double shear mounts for Voron Trident A/B motors.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 70
- Makes
- 1
- Views
- 696
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Remix of Hartk's pin mod to have double shear on the A/B motor shafts. This works with the original short shaft motors, by flipping the right motor to the top of the mount. Clee has referred to the flipped motor method as the Crazy Ivan.
Uses all the normal hardware, and a F695-RS bearing to support the end of the shaft.
You will need stronger front idlers to be able to run higher belt tension. I would recommend BFI's https://github.com/clee/VoronBFI.
In your printer.cfg, you will need to make to invert the direction of the right stepper motor.
Hardware requirements:
5mm pins
30mm (x2)
28mm (x2)
Bearings
F695-RS (x2)
Print in ABS/ASA with Voron settings:
- Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5