Centerlock adapter / holder / mount for TQ HPR50 motor magnet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part is used to replace the original magnet mount for the speed sensor of a TQ HPR50 motor.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After replacing my brake discs with such that are only available as a 6-bolt version which forced me to use an adapter, the original part of the magnet mount would grind on the frame of my bike so I designed this replacement part with enough clearance.
I‘ve tested it on a Canyon Spectral ONfly from 2025 but it should also fit other bikes which use the same sensor and a magnet which is mounted directly on the centerlock nut.
The part is designed to have a really tight fit on a centerlock nut with a thickness of 4mm, I don’t know if it would have enough clamping force on a thinner nut to stay in place.
I printed the file using a modified version of the 0.10mm FAST DETAIL preset and Prusament PC Blend Carbon Fiber (filament preset unchanged) on a Prusa MINI+. The part is printed with 4 outher walls and massive infill. The attached GCODE has been used for that combination.
You will see a pause at 2.4mm in the uploaded GCODE file (after 2.3 and before 2.4 is printed), which is meant to provide the possibility to directly insert the 8x2mm magnet. Note that the magnet should be inserted in the same orientation as in the original part. If you don't have the original part available, you need to try if both orientations work with the speed sensor or not, and place the magnet accordingly.