Halter Flaschenbürste / Bottle brush holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.18 – €7.56 net (excluding VAT)
For file: 20250714_Buertsenhalter_0.4n_0.2mm_PETG_MK4S_6h26m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.87 excluding VAT (range midpoint).
- Weight reported by the author
- 102 g
- Print time reported by the author
- 6.43 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Halter für Flaschenbürste mit Abtropfrinne / Holder for bottle brush with drip tray
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mich hat es genervt das es immer rund um die Spüle nass ist, da wir einfach keinen geeigneten Platz für unsere oft genutzte Flaschenbürste fanden. Dies gehört jetzt der Vergangenheit an. Mit diesem Halter hat die Bürste nun ihren Platz an der Spüle und alles Restwasser fließt auch durch den Ablauf des Halters in die Spüle ab und nicht auf die Arbeitsplatte.
Der Halter hat einen Durchmesser von 75mm, was für unsere Flaschenbürste perfekt passt.
Gedruckt habe ich das Ganze in PETG mit Stützmaterial.
Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
It annoyed me that the area around the sink was always wet because we simply couldn't find a suitable place for our frequently used bottle brush. That's now a thing of the past. With this holder, the brush now has its place at the sink, and any residual water drains through the holder's drain into the sink instead of onto the countertop.
The holder has a diameter of 75mm, which is a perfect fit for our bottle brush.
I printed the entire thing in PETG with support material.
Have fun printing! If you like the model, I would be happy if you leave me a like