Cameramount Prusa MK3/S/S+
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.09 – €0.11 net (excluding VAT)
For file: Cameraholder1_0.3mm_PETG_MK3S_6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.10 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cameramount for Night Vision Raspi Camera
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 60
- Makes
- 0
- Views
- 856
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cameramount for a Nightvision Raspberry Pi Camera on the X-Axis of my Prusa MK3 Printer.
This is a Variaton of these designs:
https://www.thingiverse.com/thing:2802522
https://www.thingiverse.com/thing:2873677
Thanks for the idea!
You will need some M3 Cap Screws to mount the parts.
Cameraholder 1 and 2 are connected with a small rod (approx. 2.5mm diameter) I had laying aound. I think I cut off a piece of an axel.
But you can also cut off the head of a M3 screw and thread it into the holes.
You will find a Housing for the needed Raspberry Pi here:
https://www.prusaprinters.org/prints/135527-octo-pi-raspberry-pi-housing