1 / 1
Niche Zero Chute Knocker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Re-upload of model from Thingiverse Thing #4900328. Fits Niche Zero conical burr grinder. Knocks remnants from chute.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 3
- Views
- 387
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Recommended print settings:
- Material: PETG
- Layer Height: 0.15 mm or less
- Infill % : 50+
- Supports: Yes
- Print Orientation: Default as modeled
I printed this model from Thingiverse, and am re-uploading to Printables. No changes made to the design, though I did combine the two parts into one STL file, and aligned the lever to the build plate for easier preparation.
From the original description:
Additional parts are
M3 X 16 screw and nut
Spring dismantled from a wooden laundry clip
very little rubber tape to sandwich between the knocker and the chute in case of slippage.