1 / 7
Generic WheelChair Controller Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Print without supports.
Material PETG or Better
WheelChair Bracket/Clamp to be printed with 4 walls 100% infill
Controller Mount to be printed with 4 walls 25% Gyroid infill
Use original screws to mount the controller to the plate. M4 screws for the wheelchair bracket and clamp.
Apply some anti slip tape or tpu ring for the wheelchair bracket.
Added 27mm diameter incase 25mm is tight.