1 / 3
Antenna mast portable base support for the Power Pole 7 Expedition
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 26
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast.
Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill. Do not use PLA!
Inner diameter is 53mm, tent peg holes are 11mm. If you are in need of a different diameter, please send private message.