Simple Raspberry Pi HQ Camera case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist case for the Raspberry Pi HQ Camera module with no frills
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a minimalist case for Raspberry Pi's HQ Camera module, designed to be held together by 4 M2.5 bolts and nuts.
Pro tip: Use nylon or polyamide screws, which you can easily cut to size!
Very easy to print without supports, with the front and back faces oriented toward the print bed.
The model is a recreation of PrinterIsComing's excellent original model, eschewing the Raspberry Pi logo for a more minimalist take and adjusting some of the measurements.
If you are looking for a full print camera solution for the Original Prusa Enclosure, have a look at this upload, which combines the camera case with an original Pi Zero case.