RatPack with switchable rear exit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created the option to blow to clean air outside the printer enclosure for when i'm printing without a hot chamber.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Needed to finish:
- 2 M3x6 button head screws
- Superglue
Did print well following RatRig Printing instructions in PETG.
First mount the valve to the top section with the M3x6 screws. Use some supper glue to fix the screw on the lever side, carefull not to get glue on the lever or the top section.
The lever presses on the left screw, best to use some glue.
The top section will fit on the main section, but best to use supper glue to attach it.
I made a alternative version of the main section with extensions to mount it to the back. The Normal version has an extra hole on the bottom to add half of one of the standard maounting options.