Fire Demon Can Holder / Beer mug (two types)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two Can Holders for 0.5L Cans (12oz+330ml can inserts) - In style of the Fire Demon
- Rating
- 5 / 5
- Likes
- 147
- Downloads
- 597
- Makes
- 1
- Views
- 1,836
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Fire Demon Can Holder (two types)
Fits long EU cans with a capacity of 0.5L. You can also use my insert for 12oz or 330ml (slim) cans (link below)
Recommended print settings: PLA, 0.2mm layers, 2-3walls, 8-10%gyroid, Automatic Tree supports (at least 26°), block supports inside the mouth - behind the teeth.
Be careful with the supports, remove them very carefully in the area of the teeth. I recommend using small pliers.
#1
#2
Here is the link to my model of the insert that you can use in 0.5L holders with your 12oz , or 330ml slim cans, and 10mm riser if you want better access to the top. Both are scalable, so you can make them smaller or larger in your slicer.
https://www.printables.com/model/1322047-can-holder-riser-inserts-12oz-slim-330ml-scalable
Happy printing:)