Thread Stand for Standard 1/4" Pegboard
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.14 – €0.17 net (excluding VAT)
For file: ThreadBase.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.15 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Thread stand designed to fit on standard 1/4" pegboards, uses 1/4" dowels at a 45° angle to mount any size thread cone
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Thread spool holders designed for ¼" standard pegboards. The holders uses 2 snap in pegs to mount the thread cone in the center of 2 pairs of pegboard holes. A wooden dowel is required to create the cone holder center of your desired length. The dowel is set at a 45° angle to the board so any cone or thread spool size can fit securely.
To install, snap the pegs onto the base first and then hang on the pegboard. Then insert the dowel into the 45° collar. If you attach the dowel before mounting to the pegboard you might not be able to insert the holder correctly for longer dowel lengths. It is recommended to set up all the holders first and then insert the dowels.