1 / 5
Modified 16mm clamp ring, Printed and reinforced pivot peg/barrel nut replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printed my own barrel nut, uses m3 size hardware with modifications to clamp ring.
- Rating
- 0 / 5
- Likes
- 346
- Downloads
- 532
- Makes
- 0
- Views
- 2,710
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find the correct barrel nut so i made my own! this is not a perfect solution, but I was able to get a good hold on a 16mm barrel using a kit of nuts and screws I had from a previous project (https://a.co/d/hldKSm2) Hardware Used: 1x, m3 hex nut, 1x, m3x30 screw
you will have to insert the peg into the clamp ring before putting the nut into the recess, it is kind of a pain but is made much easier with a pair of pliers