Passap Console Bracket for Metal Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bracket used to hold the console for a Passap e6000 to the metal stand.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket that can be 3D printed as a replacement part for the PASSAP E6000 Knitting Machine. This bracket is used to hold the console to the metal stand. I created the replica based on the original part. The metal bracket used to hold the console to the rear rail of the stand can be re-used or a model to 3D print one is included. I recommend printing the brackets in PLA Plus.
If the original bolt is missing, a M5 x 35mm or M5x40mm bolt (cap or button head) can be used. If using the screw-on bracket used to hold the holder to the rail is used, a M5 nut will be needed.