Passap Tension Mast Bracket for Metal Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement tension mast bracket for Passap e6000 metal stand.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 108
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket that can be 3D printed as a replacement part for the PASSAP E6000 Knitting Machine. This bracket is used to hold the tension masts to the stand. I created the replica based on the original part. The metal bracket used to hold the console to the rear rail of the stand can be re-used or a model to 3D print one is included. I recommend printing the brackets in PLA Plus.
If the original bolt is missing, a M5 x 35mm or M5x40mm bolt (cap or button head) can be used. If using the screw-on bracket used to hold the holder to the rail is used, a M5 nut will be needed.