1 / 3
MICROLAB 2x LAN/ETHERNET CABLE GUIDE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't like the cables running through, around or under the microlab, and then realised i hadn't used all the threaded holes around the side.
So here it is, a cable organiser to guide (in my case) 2 ethernet cables around the side of the microlab in an organised fasion.
I used M3x30mm socket head screws I had on-hand, however you can probably get away with shorter :)
Have fun!