Sprinkler Shield/Guard/Deflector
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.89 – €5.98 net (excluding VAT)
For file: ASA_SprinklerShieldV2_0.8n_0.4mm_ASA_MINI_2h20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.44 excluding VAT (range midpoint).
- Weight reported by the author
- 63 g
- Print time reported by the author
- 2.33 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shield to block overspray from lawn sprinklers
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
Simple sprinkler shield. I printed out of ASA using a 0.8 nozzle.
This is designed to use Landscaping Spikes or Gutter Nails to hold it in place. You could even use tent pegs or most anything, I suppose.
The V2 version is the one with the Hood (The hood also made it easier to print). The V1 version does not have a hood. After testing, I didn't like it, but I have included it here if you prefer that version. However, the only way I could get a successful print out of V1 was to use a raft.
I didn't see anything like this here, so I made my own. Hope someone else finds it useful.