1 / 5
Hanger Rod Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted support bracket for 1" dowel coat-hanger rod
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 49
- Makes
- 1
- Views
- 125
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Hanger Rod Mount – 1" Dowel Bracket with Mounting Holes
This sturdy, no-frills bracket is designed to hold a standard 1-inch wooden dowel securely for use as a closet rod or hanging bar. It features a drop-in slot for quick installation and three screw holes for solid wall or surface mounting.
🧱 Designed for:
- 1" (25.4mm) diameter dowel rods
- Laundry closets, wardrobes, utility spaces
- Wall or vertical surface mounting (e.g., into studs)
✅ Features:
- Drop-in slot: no need to slide the rod in from the end
- Three recessed screw holes for strong, stable attachment
- Gravity-based retention: no clips or ties needed
- Simple to print, install, and use
🖨 Print Settings:
- Material: PLA, PETG, ABS, or other rigid material (not TPU)
- Infill: 100% recommended for maximum strength
- Orientation: Flat backplate on the print bed
- Supports: None required
🔩 Mounting Tips:
- Use #8 or M4 screws, ideally into wood/studs
- If mounting to drywall, use appropriate anchors
- Recommended spacing: pair with a second bracket at the opposite end of your dowel span
🧰 Notes:
- Gravity alone holds the rod in place if properly installed
- Designed for typical closet use (shirts, pants, jackets on hangers)
- Tested with ~1 meter span and moderate load with no deformation