Baggage Tag - write your own text! - Key Chain tag
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.29 – €0.35 net (excluding VAT)
For file: Kofferanhanger-Credit Card Half Size Tag_strukture_0.4n_0.15mm_PLA,PLA_MK4SMMU3_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.32 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 16.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Write your own text on your baggage tag or key chain tag
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Baggage Tag - write your own text!
You get three base Models:
- Full original Credit Card size (84mm x 54mm x 1mm)
- Full original Credit Card size but thicker (84mm x 54mm x 1,5mm)
- Half size Credit Card metrics, thicker (84mm x 26mm x 1,5mm)
It is prepared for colored multi material print
| Settings | Value |
|---|---|
| Infill | 5% (adaptive cubic) |
| Perimeters | 2 |
| Layer Height | 0.15 mm Structural |
| Material | PETG / PLA |
| Supporting Material | none / organic |
| Comments | printed on MK4S with MMU3 FW6.2.4 |
| Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!