Penguin anfas picture - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Penguin anfas picture - 110x170 mm HueForge Without frame Licensed image
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 110x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.6mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1
PLA+ HIGH SPEED Jamg He White Transmission Distance: 6.9
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Telegrey
At layer #11 (0.96mm) swap to White for the rest.