Case for Treedix USB cable tester
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have created a housing for the Treedix USB cable tester. You need the optional acrylic case
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 177
- Makes
- 5
- Views
- 492
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I have created a housing for the Treedix usb cable tester. For which you need the optional acrylic plate and screws
Material: Black PLA with 0.2mm layer height
Printed with Bambulab X1C
Required parts:
-4x M3x10mm screws
-Treedix USB Cable Tester with Acrylic case
https://www.amazon.com/dp/B0CF95VL2Y
If you want to replace the battery, simply loosen the top 4 screws and remove the electronic from the housing.
If you don't have the acrylic case, you can alternatively use some 16 mm nylon standoffs. You can use those along with 4x10 mm bolts from the bottom and 4x6 mm bolts from the top.