Core One removable silicone brush nozzle wiper - 6x3mm remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nozzle wiper with removable silicone brush remixed to use 6x3mm magnets Fits with cryogrip build plates.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 40
- Makes
- 1
- Views
- 604
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Remix to use 6x3mm round magnets.
I designed this for PC-CF and the magnets fit very snuggly so no glue is needed. It may need scaled up a tiny bit if you print in something like ABS that will shrink. You'll just need to experiment.
Tap the magnet into the removable brush holder then tap the other into the bottom of the upper mount piece, making sure your polarity matches the brush holder magnet. Once the 2 mount pieces come together, the magnet should nestle into the hole on the bottom mount piece a bit.
I recommend using some silicone glue on the brush itself. The brushes can have pretty lame adhesive and from my experience on my Voron, the nozzle will eventually cause them to start pulling up on the end. https://www.amazon.com/dp/B0DSBZGPF9 works really well.
See original model for start gcode.